One of the segments of a vape that’s often forgotten when it comes to cleanliness and hygiene is the device’s battery. Since all it does is charge the actual vape and let it run correctly, the only thing vapers remember about the battery is that they need to let it recharge every once in a while. However, they often forget just how critical the connection between the battery and the rest of the vape is. Furthermore, improper maintenance and dirty vape parts can decrease the lifespan and performance of vapes.

The magnet collects tiny oil droplets over time in normal use the oil condense and sticks the components together to both cartridge and battery, when the oil cools it hardens, when swapping cartridges it can put strain on the coil and in some cases pull the centre coil our making both cartridge and battery unsualable, this can easily be avoided by removing the cartridge after use or cleaning the items every few days

Watch the video how to clean your vape. once cleaned allow to completely dry to vape again.

The CCell Palm pairs with nearly all bottom airflow 510 cartridges and activates on inhale without any buttons!

The CCell Palm is one of the most convenient palm sized 510 cartridge vaporisers we’ve used. Instead of button activation the Palm heats in sync with your inhalation for around 200 draws per charge. The aluminum build is tough, light and tiny, an ideal everyday carry for your pocket, bag or backpack. CCell carts fit onto the Palm using one of the two included magnetic adapters.

Key Features:
Activated by Inhaling
Compatible with CCell Cartridges
2 Magnetic 510 Threading Pieces
Up to 200 Draws Per Charge
550 mAh Battery Capacity
Aluminum Build
Micro-USB Charging
Dimensions: 2.17″ x 0.35″ x 1.65″
Weight: 44g

Simple to Operate:
Attach one of the magnetic adapters to your loaded 510 cartridge, place it into the CCell Palm and you’re good to go. The Palm vaporiser is activated automatically when you inhale for the quickest and easiest rips.

Included Items:
CCell Palm 510 Cartridge Vaporiser
2x Magnetic Cartridge Adapters
Micro-USB Cable

The Original DabCap

Convenient, clean, and flavourful

Compatible with nearly any setup.

Perfect for any smoking connoisseur! Simply attach the DabCap to the end of your vape pen and press down into the bowl of your water pipe creating a seal, then draw through your pipe, easy as that. Ascend to new levels with the DabCap!

Authenticated imini pen battery
Product Feature:

Imini pen battery with preheating and variable voltage functions 360 Amh

Click 3 times: to adjust voltage

Green light 2.9v
Blue light 3.4v
Red light 3.8v

Click 2 times : 10sc preheating with LED lights flashing

Click 5 times: On/Off

Charging : Type C

Image shown is complete vape kit

Silver Imini battery pen variable adjustable heat settings

Authenticated imini pen battery
Product Feature:

Imini pen battery with preheating and variable voltage functions
Voltage settings 2v to 4 voltage Amh 360

Click 2 times : 10sc preheating with LED lights flashing

Click 5 times: On/Off

Charging : USB

Image shown is complete vape kit

Authenticated imini battery
Preheat: 10s
Model name: imini V2
Imini V2 size: 34mm*19mm*59mm
Thread Type: 510 Thread
Material: Plastic+brass
Battery capacity: 650 mah
Cartridge: Diameter under 13mm
Tank capacity: 0.5ML 1ML

The package of Imini V2 Comes With:

● 1 x Imini V2 Battery

● 1 x USB Charging Cable

● 1 x Gift Box Package

imini v2 Operations:

1. Power On/Off: Press the fire button 5 times, and the fire button light is on, enter vaping mode; press the fire button 5 times in 2 seconds continuously, turn off.

2. Preheating: Press the fire button two times, the battery starts to warm up, and the preheating time is 10S.

3. Power adjustment: In the power on state, continuously press the fire button 3 times to adjust the output voltage 2.9V-3.4V-3.8V.

The current voltage is 2.9V , the LED light is green

The current voltage is 3.4V , the LED light is yellow.

The current voltage is 3.8V , the LED light is red.

The current voltage is lower than 2.9v smoking, LED lights flash 10 times red, indicating that the battery needs to be charged.